Gold Member Since 2016
Audited Supplier
REFOND EQUIPMENT CO., LTD.

Bursting Strength, Bursting Distension, Testing Equipment manufacturer / supplier in China, offering High-Quality Pneumatic Bursting Strength Tester, Drying Rate Tester-Heated Plate Method (AATCC201), Aatcc201 Drying Rate Tester-Heated Plate Method and so on.

(/ )

Supplier Homepage Product Autoburst High-Quality Pneumatic Bursting Strength Tester

High-Quality Pneumatic Bursting Strength Tester

FOB Price: US $20,200 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $20,200/ Piece
Get Latest Price
Transport Package: Wooden Case
Payment Terms: L/C, T/T
Basic Info
  • Model NO.: RF306A
  • Specification: 482(L); 565(W); 800(H)mm
  • Trademark: REFOND
  • Origin: Shenzhen
Product Description
Product Information:
The Pneumatic Autoburst is so designed to determin the bursting strength and distension of specimens at it burst point by using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards by the application of pressure load under a rubber diaphragm.
RF306A Pneumatic Autoburst is using the high precision pressure sensors to measure the bursting strength and non-contact displacement measurement sensor to measure the distension at burst of fabrics. High quality transparent acrylic bells, combined with LED light source, full examination of a sample of bursting.
The RF306A is smart designed to cover all the test methods you can image. This design does not only fulfill the requirement of existing test standards, but also open the imagination space for the fabric designers.
Four test modes are included:
High-Quality Pneumatic Bursting Strength Tester


 
  1. Automatic Bursting Mode: It is so controlled that the specimen will be burst with 20±5 seconds.
  2. Fixed Flow Rate Bursting Mode: Flow rate can be set so as to meet different test method, such as the M&S test standard.
  3. Target Distension Bursting Mode: Specimen can be inflated to a fixed height and hold for a desired time, so as to determine the specimen strength.
  4. Target Pressure Cyclic Mode: Specimen can be inflated (UP) and deflated (DOWN) by some cycles, inflation and deflation flow rate can be controlled and UP hold time and Down hold time can be set as desired. So as to determine the extension and bursting of the specimens.
High-Quality Pneumatic Bursting Strength TesterHigh-Quality Pneumatic Bursting Strength Tester
Touch-screen control design. All settings are in one page.Testing results can be stored in memory, and can be transferred to PC for storage and printing.
 
Perfect PC software can monitor test data online, save and print test result.
 
Test Scope:
Testing the knitted, woven and non-woven fabric, paper and cardboard in the bursting of the largest height and bursting pressure values
Testing Standards:
ASTM D3786-06,ISO 13938-2,ISO 2758, EDANA 80.3-99,NEXT 22 2006, IWS TM29,M&S P27, GB/T 7742.2, M&S P27, Adidas TM 4.09, etc.
Consumables:
Rubber diaphragm & a set of Acrylic bell test kits
Specification:
  1. The testing pressure range: 100kPa-1500kPa(or 200psi)
  2. Distension: 70mm
  3. Test Bells: 7.1cm2(diameter: 30mm),7.3cm2(diameter: 30.5mm),7.55cm2 (
diameter: 31mm),10cm2(diameter: 35.7mm),50cm2(diameter: 79.8mm),100cm2(diameter: 113mm)
  1. Test Bell Clamp Control: two button controls, and touch-screen software controls
  2. Preset number of test samples
  3. Automatic recognition for the bell size and diaphragm ring
  4. Test results are saved automatically, historical data recalls
  5. One-key-press to transfer stored test data to PC for storage.
  6. Integrated PC software can monitor test data online.
  7. Pressure units: kPa, bar & PSI
  8. Test units: mm, cm & inch
  9. Four test modes
  10. Power Supply: AC230V, 50Hz
  11. Compressed Air: 7 bars or above
Send your message to this supplier
Avatar
Mr. Pauking Wu
*From:
To: Mr. Pauking Wu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now